How to close the pipe in the bathroom - the most simple and effective ways to disguise

When afoot repair in the bathroom, there is a chance to hide unsightly-looking communication, making the interior more attractive. However, intending to conceal the pipes, it is important to leave at the same time an opportunity to check them and to repair. And the way to solve this problem, there are several.

Bathroom is an important part of the house or apartment, which always tend to give a cozy and beautiful. But even the most high-quality and fashionable repairs will not bring joy, if the pipes and other communications will remain visible. Besides, on the unmasked tubes due to the high humidity often gather the water drops. The result is a darkening of the pipes over time.

Competent disguise pipes required for the repair, it will make a neat room and its design - a stylish and modern.

Which pipes are installed in the bathroom

Depending on their purpose pipes in the bathroom may be related to plumbing, heating and sanitation. Routing water pipes is more convenient for installation and replacement, but when dealing with sewer pipes should always remember stipulated in them an inclination towards the riser. If you touch and those relating to the heating system in the bathroom there is a heating radiator, questions masking of pipes.

In addition to the appointment of the pipe in the bathroom are characterized by their material. It is now rare to find a metal pipe, as modern plastic pipes have a large number of advantages. They are easy to install, no need to paint, it is easy to replace. Such pipes are light in weight, resistance to corrosion.

Often the pipes in the bathroom are fairly strong and thick polypropylene pipes. PVC products are distinguished less thick walls, though attracted by the price. However, they are inferior to cope with the high temperature and pressure of the water. If you choose to install them in the bathroom, be prepared for a short operation and do not hide them tightly.

Also pipes of polymer in bathrooms often set Metal and welded steel pipes, but it is more expensive options.

What can hide, but you can not

If you plan to tightly closed disguise pipes, it is necessary to understand that not all communication necessary to hide this way. Primarily it is not suitable for fittings masking - compounds in the form of letters X, T or G. They are the points where the increased risk of leakage. Also, do not close tightly the place where there are counters, cleaning filters and other compounds.

Walling up into a wall steel tubes can be welded joints, brazed and copper pipes. All threaded pipe joints to hide in the walls without the ability to quickly access not recommended for them.

Firstly, the setting of the pipe in the bathroom, try to reduce the number of connections. To achieve this will help competent layout and strategically placed equipment.

Secondly, if the compounds are provided, they should be of the same material from which the pipes are made. It is important that their safety margin was identical or higher.

Third, for easy access to valves, meters, hydrants and other elements should be left hatches.

Fourth, that on the pipes prevents condensation, use insulating materials. In the case of buried pipes in the wall of the presence of the insulation will allow the pipes to expand (this is especially important for the pipes through which hot water flows).

To hide the different ways of communication used in the bathroom. Horizontally disposed tube by means of additional work to conceal walls fulfilling shtrobirovanie, then surfacing tiles or plaster. Also, pipes are often hidden in the box, the design of which is made of gypsum board or plywood, selecting a material resistant to moisture. Such a box can be finished with tiles or other material.

To hide the pipe structure can also be created externally similar with furniture cabinets. Pipes in such cabinets only occupy a part of the site, while the remaining area of ​​the shelves used for storage of economic detail. It is also a popular option is the installation of roller blinds in the bathroom. Choosing a nice decoration, they even decorate the room. And always remains an option for creative people - paint tubes, covered with mosaics, apply artificial plants, stucco or other ideas.

The walls hide recommend only pipes made of copper or polypropylene - is firmly welded or soldered, without screw connections. In this way it is possible to hide aesthetically horizontally extending pipe. Their pre-placed in corrugation, then after shtrobirovaniya placed in the wall from above and treated concrete or screed. On dry screed can be laid laminate, tile and other cover.

It is important that prior to using the pipe screed is completely dry. If enable hot water when crude coupler, the coating will crack. The process is costly and forces, and in time (requires a long preparation). It is often chosen for new apartments (for repairs "from scratch") or in the case of redevelopment. For its implementation should be used grinders, chisel, hammer and other tools.

Before you start shtrobirovanie, it is important to create a paper layout scheme, which will be the best option for your bathroom. Forming such a scheme, take into account the route and the diameter of the pipes, and also features walls (suitable for shtrobleniya whether what thickness if reinforcement, a thickness of the screed will be needed). In the right places (adapters, faucets, counters, thread) satisfied with viewing windows.

Remember that do not perform shtroblenie horizontally in the panel walls. Also, such a manipulation is not carried out at the width of the wall in half brick.

To use this method for this moisture-resistant drywall. The popularity of this method of masking provided by its simplicity and processability, and affordability.

Drywall helps to hide not only the pipe, but also sewers as a whole, however, a significant disadvantage in this case is to reduce the usable area, that for small bathrooms is an acute problem.

Most often, plasterboard box installed in new buildings, where the bathrooms spacious similar premises in the "socket" or "Khrushchev".

The basis is a metal box or a frame profile of the wooden bars. He sheathed with plasterboard, which further trim to taste.

To access certain portions of the wiring in the plasterboard making holes, which are installed on the door manholes.

Practical option to hide the pipe in the bathroom - to create a furniture design. With the help of the interior may look richer and more attractive. Typically, such a structure is a cabinet with shelves.

For a vertically arranged tubes suitable embodiment of the finished enclosure, canister, wherein the take away a back wall and a place under the shelves cut tube. However, finding furniture that will for a long time in contact with the wet tubes and not to spoil, is not easy. A processing all surfaces purchased enclosure means for protection against moisture spend you money and time.

Because more often in the case of communication furniture camouflage design or create your own custom.

Material for the manufacture of furniture to the bathroom often choose laminated chipboard, resistant to moisture. A cabinet door in a selected depending on the placement of sanitary equipment - sliding or hinged. Installing structure all cracks treated with silicone for better tightness.

Another way to disguise that can be called easy and practical - to use a special screen. This frame, wherein the guides 2 are fixed plasterboard panel or plastic. This screen is inexpensive and looks nice. It can be easily removed, making it easy to repair, but less it is the same as that of the plasterboard boxes - reducing the area of ​​the room.

This is an interesting solution for the masking of communication that does not take useful space. Since most of the pipe passes close to the floor, enough to make a small step to hide the plumbing. For such a catwalk boards used vlagoottalkivayuschey treatment materials.

Their main advantage - the ability to easily complete access to the pipes, filters, counters and rest. Shutters to toilet and bathroom are of a different material. They are the best option if the tubes are in a niche. To establish their worth during the repair work, then you will avoid unnecessary costs.

In the case of camouflage net in the wall are possible restrictions for work as horizontal shtrobirovanie in panel building and working with thin walls is prohibited. Also, if the wall hid unsuitable for this purpose and low-quality pipes, there is a risk of break and flood the neighbors. Even if you make a viewing window, access to communications will still be limited.

Plus options to hide the pipe in the walls of a bathroom aesthetics. You can decorate the top of the pipe hidden at will, for example, oblitsevat tiles. In addition, since you can not reduce the working space.

Option with duct plasterboard also restricts access for repair or inspection communications. To replace the pipe conduit will have to completely dismantle and repair after reset. In addition, the installation will take a box in the bathroom valuable centimeters square.

Selecting shutters, you, on the contrary, will get the maximum access. This is a practical and very mobile option. But as for their production using soft materials, blinds easily damaged (bent or broken), if the lean or strike.

The drawback of masking pipe furniture is contacted with moisture. Even waterproof material deteriorates with time, and to prolong the service of the furniture in the bathroom, it should be frequently cleaned with a dry cloth. Treated silicone in place of such furniture should always check (to the silicone layer is not broken). You should also avoid scratches. Plus the use of the furniture as a way to hide the pipe is attractive premises, as well as practicality, because in the closet, you can store different supplies.

Siphon for washing machine: which one is better to choose?

Ventilation in the wooden house. Features of ventilation in the bathroom

Moisture resistant drywall: a modern design in the bathroom - it is easy!

Repair of bathroom in "Khrushchev"

How to drain the water from the boiler - step by step guide

The gap between the bathtub and the wall: the most simple and effective ways to seal the gap

All rights reserved, 14+

Copying site materials is possible only in case of installation of an active link to our website.

How to close the pipe in the bathroom with their hands?

Many owners of modern apartments are often the question arises, how to hide the pipe in the bathroom with their hands. After all, comfort in the room and create furniture and sanitary equipment. There can be no question of beauty, if at the same time see the beautiful tiles and on its background unsightly rusty pipes. How to hide the pipe in the bathroom under the tile? Consider a few options to address this issue.

In a renovated apartment to hide the pipe in the bathroom and not namusorit - it is impossible. How to hide the pipe in the bathroom? It is better to engage in such work on the stage of repair. They can hide in the wall. How to remove the pipe into the wall? It will not be possible to produce products with a diameter of 110 mm. The wall can make cuts to a depth of 50 mm. But not all can hide there. Piping systems are:

Welded suitable for them to hide in the wall. A fitting can begin to trickle out over time. The walls in this case be melted. The cutting grooves (grooves in the wall) zavedetsya fungus and other harmful microorganisms. Stroebe it is necessary to seal grout. Remove the tube wall and can fix them by special fasteners. Grooves for them do hammer and a circular saw.

How to close the pipe in the bathroom in another way? You can do this with plasterboard or plastic boxes. This method can be an excellent solution for those cases when you need to hide risers or beds having a large diameter. Even a large number of thin pipes can be hidden in a box. It is made of drywall or plastic.

The plastic box is easy to assemble and disassemble. It is suitable for covering of old pipelines, strength and quality of which are questionable. Plasterboard is recommended to close the new pipe. This is due to the fact that the drywall is usually glued tiles. For the manufacture of boxes needed:

  • Profile UD - 4 pcs .;
  • Profile CD - 1-2 pcs .;
  • plasterboard or panel made of plastic;
  • dowels and screws;
  • drill;
  • a hammer;
  • Screwdriver or screwdriver;
  • building level.

fasten the guide to the wall. Their position is regulated level. Ready frame paneling made of plastic or sheets of drywall. Installation of plastic boxes to perform better after the completion of the other finishing work. Plasterboard box made in advance. for them the same frame. The plasterboard need to think about and build inspection hatch for quick access to pipelines. Then, hidden and disguised pipeline can always view and does not damage the skin.

How else to hide the pipe in the bathroom:

  • The pipes in the bathroom can be masked in a niche that builders often leave. If it is, do not have to sacrifice the area of ​​the room. Tile put up niche edges not reaching them by 2-3 cm on the edges glued to the plastic part -. Connector. In his plastic panels are inserted. If the pipeline is new, you can also arrange plasterboard. Do it a bit more complicated than put plastic. Inspection door to leave is necessary and in the niche. Especially it is necessary, if for him hidden counters and other instrumentation.

In the development of any method you need to consider the placement of all the pipes, devices, junctions and turns. It is advisable to mark it all on the wall and on the floor. This will provide an opportunity to spend less time on practical work, because part of the product will be on the floor. Under them do not need to Stroebe walls.

Under the fill can be placed heating circuit water system. If the pipes in the bathroom will be hidden in a box, you need to isolate them further layer of foam, mineral wool, and then close the plasterboard or plastic panels. Drywall better to use water-resistant.

Another way to hide the pipe in the bathroom:

  • A good way - to close the pipe in the bathroom cabinet furniture, which can be made with their own hands. Shelves closed doors. Formed yet and storage for household chemicals.
  • You can mask the foam moldings, colored mosaics, artificial flowers and vines, just paint suitable for interior paint colors. And shutters are used (metal shutters roll type). They provide full access to the hidden and allow to equip the shelves for household chemicals. Installation is straightforward, the color of any selected.

Mask tube in the bathroom, you can:

Stucco - a material to work with who do not need to have special skills. He is very practical in design, can be easily removed and pasted, easy to process.

Mosaic - an exclusive solution. Just can product the color paste over the situation or tiles. But to use the mosaic can be a fairly big things and large diameter pipes.

Roller shutters or plumbing - hide another embodiment of the pipe. At the same time they are a decorative element. Shutters are very practical in operation, allows easy access to all the hidden portion of the conduit. They can be equipped with drive - manually or mechanically. Roller shutters are durable and comfortable. The disadvantages include their high cost.

Lattices of metal mounted on the established frame. They bring variety to the design of the room. Falshsteny able to hide multiple items made of plastic or steel. But they occupy a part of the useful area of ​​the bathroom. They made of plasterboard and hide behind them all that is there.

We've already figured out how to hide your plumbing and other pipes in the bathroom. This can be done in different ways. The main thing - keep viewing channel for the inspection and repair of threaded connections, meters, valves and fittings. Access to the valve should always be open.

All items desirable to wrap a layer of waterproofing material. This is done to ensure that they do not sweat. It is best to use a hidden communication polypropylene products. They will go under the floor fill. All connections are better than good boil. Before laying on the floor product should be placed in the corrugated hose. All stacked on top covered with a layer of cement or concrete pouring. Thickness - at least 2-3 cm above the pipes. On screed is laid tile, linoleum, laminate panels.

The pipes in the bathroom can be placed in the pocket or in the wall. Cutting grooves for laying usually used grinder with diamond blade or a chisel and hammer. Polypropylene or steel products are hiding in the grooves, and Stroebe smeared cement. The most common way - to hide in drywall or plastic box. These systems should be required to have inspection hatches.

How can I hide the pipes in the bathroom and toilet: methods and their features

The question of aesthetics in the regeneration of any pipeline is not as important as the functionality and reliability of the system. Particularly acute this problem is in the areas of the apartment or house, where the main water communications: the toilet and bathroom. Ways of how to close the sewer pipe in the bathroom or the toilet, there are many. And each of them has its own advantages and disadvantages.

The pipes in the bathroom close to give the room neat and aesthetic appearance

How to hide the pipe in the toilet and the bathroom: the main ways

If the water supply system is laid for the first time or major overhaul in the house, then the variant bookmark pipes in the wall (shtroblenie). Pipe location calculations are made when creating water supply plan. not recommended so sewer risers with a large diameter to hide in the wall. After all, if the wall is "clipped" so deep, it may adversely affect the integrity of load-bearing structures at home. Grooves can be hidden in the pipe diameter of 50 mm.

Tap can conceal wiring and manner of installation to the floor. Tubes then stacked on the plates overlap and are filled with a cement screed. Naturally, the material tube must be calculated for the location of a coupler, i.e., withstanding a certain pressure. Especially it is necessary to pay attention to this when choosing a plastic pipe for plumbing.

But if installation of the pipeline has made open method, the only option is to hide the pipe is to create a decorative structures in the toilet or bathroom.

All methods of mounting structures in order to disguise the sewer pipe in the toilet and the bathroom are very similar principles. Their main difference is the choice of easy-to-use material that will provide a bathroom or toilet aesthetic appearance.

Water pipes of small diameter can be hidden in specially prepared recess in a wall - Stroebe

In addition to the external characteristics, there are some basic rules of the choice of finishing materials:

  1. The selected materials should be easy to care for: easy to clean, not exposed to aggressive cleaning agents. Also it prevents the use of materials that are prone to corrosion.
  2. From light and thin materials obtained very compact design, which is important for bathrooms with limited space.
  3. The material should not deteriorate from exposure to moisture, temperature changes, and atmospheric pressure. When heating or cooling it should not be allocated any substances that are harmful to health.

Correspond to these requirements, there are many materials. To hide the pipe in the bathroom and the toilet, use moisture resistant grades of plasterboard or plywood, MDF, plastic decorative panels.

How to hide the pipes in the bathroom and the toilet?

The main rule that should guide the choice of the method of masking the pipeline, is to preserve the possibility of access to communications. Camouflage design should be such that it can be easily opened and closed in the event of breakage of the plumbing system. If this part has not been given sufficient attention in the event of force majeure decorative wall have to break completely.

Good to know! In some apartments when designing bathrooms special niche in the wall for laying pipes originally planned. In this case, a recess with a pipeline laid plasterboard or plastic. This is ideal as hide pipe - in this case the bath area is not reduced.

If communications are present water meters and valves, then to access them you need to use the installation method of auditing the hatch. Mount the inspection door and can after laying the decorative wall if necessary. It's enough to cut a hole in it the desired size and then close it with a plastic hatch door.

Closing the tube false wall, it is necessary to arrange in it the door for access to communications

Before installation structure hiding the pipe, it is necessary to ascertain the absence of defects in the pipe joints. The system should not should not be a leak or deformation. Fasteners must be well sealed and the sewer pipe - to have a desired angle of inclination.

How to close the sewer pipes in the toilet or bathroom decorative panels

Plastic or plasterboard panels (falshsteny) - is one of the most optimum embodiment, as can be repaired (hide) the sewer pipe into the toilet with a small area. You can close the communication and bathrooms. Falshstena may be finished by any method, for example, often used ceramic plating. On sale there are also plastic panels of different textures and colors that do not require additional finishing.

For the walls in the bathroom and toilet are used plastic panels made of PVC. Their dimensions are as follows:

  • thickness: 5 to 10 mm. Falshstena The greater, the stronger must be the panel;
  • Length: 260 to 600 cm;
  • width: 10 to 50 cm.

If falshstena made of drywall, grout should buy a primer and putty. For maximum protection plasterboard walls from moisture may be treated with an inner part of the structure varnish. Plastic same panel waterproof and equipped with special locks on the edges of the product, so they can close the communication without additional funds.

For attaching decorative panels must be mounted crate

If you do not plan to install the auditing hatch, it is better to carry out finishing bathrooms with plastic panels. We do not recommend the use of drywall, and in those cases, if you want to hide the old pipe. In the event of an accident the plastic wall is dismantled easily and quickly, as opposed to drywall, lined with tiles.

Installation falshsteny carried out very close to the ceiling and the floor. The distance from the main wall to decorative taken min, 70 to 100 mm. To install the panel mounted base substrate made of aluminum profile, better - galvanized. A distance between the guide profiles depends on the area of ​​the wall -. 30 to 60 cm metal finishing material skeleton is sheathed by means of screws.

To hide the corners, edges and corners design uses angular profiles, the starting strip and plinth. Places panel joints with profiles better seal the silicone sealant after installation.

Hiding sewer pipe in the toilet: duct of plasterboard or plastic

Box - this is one of the varieties of falshsten. Installation is the same, with the only difference is that they can only hide the pipes, they will not take up an entire wall.

Instead, the entire false wall you can build a small box made of wood or drywall

Box or the podium (if you want to hide the horizontal tubes) can be an excellent place to store tools or household chemicals.

Helpful advice! When mounting the boxes material should be selected so that it does not have to join vertically (e.g., panels with a complex pattern). In this case, you may need additional support straps to maintain rigidity.

Functional variant, in order to hide the pipe in the bathroom and toilet, will box-in wardrobe. Its installation is somewhat more complex than the simple installation of the boxes, but this design is different practicality. To simplify the work, you can buy ready-made door for boxes, cabinets.

The framework for this type of boxes will have to do wood. Bars before work necessary to process an antiseptic that protects the wood from fungus and rot. Wall-box enclosure may be made of plasterboard, plywood or a laminated material. The lower part of the box is better not to put directly on the floor in the toilet or bathroom, so as not to spoil it in the event of a spill of water. The basis for the box can be a leg height of at least 5-7 cm.

In today's market you can find ready-made boxes to hide the pipe. If they are suitable for bathrooms according to size and style, it is possible to cover the tube and such structure factory. This significantly reduces the time required to furnish the room.

If you allow the floor area, you can make a case for pipes with sliding doors or roller shutters

As can hide pipes in the bath via roller blinds

Shutters (shutters, blinds) - a good option for masking pipes. Such a method is remarkable in that the shutters allow continued access to the pipes. But the installation of these elements has some features and complexity.

Roller shutters are installed on the existing basis, ie installation falshstenok or boxes to avoid not work. The decorative panels must be cut through the window, as is the case with the installation of the auditing hatch. And only after this hole mounted shutters. It is noteworthy that not all such constructions which are commercially available, are suitable for this purpose. Buying worth only special modifications to plumbing. They differ from conventional roller blinds that are made of stainless metal or plastic.

For bathroom or toilet, you can also choose blinds with electric motors, hidden in a dry box. But in that case, if the width of the opening is less than 52 cm, it is necessary to use blinds that can be opened and closed manually.

Like the stuff? Share with your friends!

Mounting and main features of plastic pipes

Soldering - reliable PVC pipe joining method

Repair of copper and other types of pipes in the home: the methods and rules

Types and characteristics of plastic pipes

JV "Domestic water supply and sanitation." Basic rules and regulations

Trenchless pipe: methods and technologies of work

Recent comments

  • Jeanne Gorokhova recording Galvanized steel pipe: advantages and features
  • Jeanne Gorokhov write to pipe with insulation foam OC: dimensions and characteristics
  • Andrew Vozhdayev recording Sandwich pipe for the chimney: the size, design, advice on choosing
  • Fire and Ice recording Sandwich pipe for the chimney: the size, design, advice on choosing
  • Snow to write Sandwich pipe for the chimney: the size, design, advice on choosing
  • B. recording Sandwich pipe for the chimney: the size, design, advice on choosing
  • Andrew Vozhdayev recording Sandwich pipe for the chimney: the size, design, advice on choosing
  • Olga recording corrugated pipe made of stainless steel, for heating: application features
  • Dmitry Poshtarenko recording aluminum tube. Oval and round cross-section
  • Maximushka suction hose to the recording: types, purpose and use

Advertising

Use of materials is possible only with active link to the source.