Plinth on the floor made of plastic

separate the premises The final stage is the installation of the baseboards. This - the final touch that gives the completeness of the interior. Increasingly, instead of the usual wooden planks, used a plastic floor plinth. It has a low cost, easy to install and maintain.

Plastic floor plinth - a practical solution that allows us to solve two problems simultaneously - give the room a finished look and hide, if necessary, the wires, which are in our homes is more than enough.

Plastic floor plinth - a practical solution

PVC skirting boards for the floor have the following advantages:

  • Light weight.
  • Simple installation, requires no prior or subsequent training.
  • Long service life, UV-resistance, household chemicals.
  • Easy-care, lack of need for regular updating of the decorative coating.
  • Harmlessness.

Install plastic floor plinth - a practical solution. Gradually, they replace traditional wooden plank, as in many respects they are superior. Shortcomings bit. First - plastic - it's unnatural material. Second -goryuchest plastics and allocating wherein the harmful substances.

Using PVC floor plinth with cable channel can covertly dilute wires / cables

With unnatural nothing will protest, but such "unnatural" around already so much that she even detail the role will not play. Besides good plastic is chemically neutral, in the normal state do not emit any harmful substances.

Flammability is in plastics is different - there are plastics that do not burn and are flame retardant, is - with low smoke emission, which has minimized harmful substances. So if you want you can find a non-flammable plastic floor plinth.

Plastic floor plinth can be of the following varieties:

  • conventional;
  • flexible;
  • with kabelkanalom;
  • a flexible (rubber) edge;
  • for painting.

Let's take a closer look at each species.

If necessary, arrange columns, curved walls, rounding, there is a problem - the usual rigid strips used is problematic - you have to cut into small segments that join by means of connecting elements. Time leaves a lot of money gets expensive, and the view - not far from the ideal, since it still turns broken line, rather than a smooth curve.

So decorate rounded walls and skirting standard plastics

But in such cases it is better to use a flexible plinth. The concept of "flexible" relative. Normally he's tough, and well bent only at higher temperatures. Before mounting on curved surfaces, it is heated dryer construction to 60-70 ° C, is folded in a form that is required and secured.

After cooling down, he gains the initial stiffness. They can easily arrange the column, for example, not to mention a smooth curve.

Plastic floor plinth - is the most flexible of these products. If necessary, you can draw so that he lies down, even to an uneven wall. But to achieve a complete snuggling to an uneven wall without any gaps can be only if the top edge of it is made elastic - rubber.

Rubberized edge makes it possible to avoid even the slightest cracks

The elastic edge has the same color, though made of plastic material. Due to its high elasticity it surrounds even the smallest irregularities, leaving cracks and gaps.

In the modern home more hardware and wires going to it. One of the most convenient and cheapest ways to discreetly carry cables around the apartment or house - to install a plastic floor plinth with cable channel.

Cable channel - a specially-formed recess / cavity of the entire length of the floor. At the groove placed some wires - television, telephone and computer cables. There are two types:

  • Molded with a recess in the body of the plinth and a removable trim strip. First plinth is mounted, then the cables are laid in the recess, after the strap is closed.

This plastic floor plinth with a molded recess for cabling

This skirting board with cable channels consists of two parts

The number of stacked cable depends on the size of the cavities in them. More space is in the models of the second type - with separately mounted cable channel. But the capabilities of the first type can be expanded - after putting the wires into the cavities above and below the formed channel. The problem is that access to them is difficult - they are under the plinth. To get to them, will have to be dismantled. Because here it is desirable to lay wires, which rarely require service - TV, Internet, etc.

There is a plastic floor plinth made of foam PVC. Through the use of the porous material surface can be painted. A good option if you need a non-standard color solution. After all, the set of colors is still limited, and you can pick up the desired hue.

Non-standard solution - plastic floor plinth made of foamed PVC for painting

Plastics - one of the most plastic materials, allows to make products of any shape and size. Because plastic floor plinth can be of any section and sizes, but has still certain limitations that are associated with the practical side. Generally produce plastic moldings with the following parameters:

  • height 50-120 mm;
  • thickness of 10-26 mm;
  • 2000-25000 mm length.

Some types of plastic skirting boards with dimensions

This is - the most common sizes, but there are individual variations. For example, there are wider at the bottom - 50 mm. They are necessary, if the gap between the wall and floor covering slightly more than the required technology.

When installing plastic skirting boards need not only the plinth, but also additional (final assembly) elements to them. It:

  • The outer and inner corner.
  • Connector - to splice two pieces of the plinth.
  • Plugs - for registration of slices in place of contiguity to the door.
  • Brackets - for laying cables in the corners.

Types of additional elements for PVC skirting boards

The number of additional elements considered for each individual case. It has to be considered as external and internal angles in the room to make out. Plugs considered too simple - for every doorway requires two pieces. A little more difficult to determine the number of connectors, but they can be taken with some reserve.

There are two ways to install plastic skirting boards:

  • Screws or dowels, nails through the surface of the plinth.
  • Using special clips.

There is also a method of fixing

The second option is suitable only if the walls are perfectly aligned. On the walls of the curvature of the better use conventional method of fixing - with screws or dowels plastic floor plinth can pull right up to the wall so that he would keep up the wall. Better in this case to use a model with a rubber edge.

This method of mounting is realized by means of two types of clamps - clip in the form of individual platelets and long plate of the same length as the plastic moldings. The difference is that in the long lock is used as a cable channel, that is, in this case, the plastic moldings can secretly carry cables / wires.

The principle of fixing clips of any type is the same:

  • Attached to the wall clips.
  • The plastic part is simply snapped onto them.

Fixing of plastic moldings using clips

It is worth saying again: this method is only for perfectly flat walls, otherwise the result will be unsatisfactory. The procedure works is simple:

  • On the wall at a height where the clip will be located, cause the mark.
  • Discourage the mark a horizontal line (handy laser level).
  • Focusing on the line, or attach the clip bracket with cable channel.
  • Laid cables. They can further fasten the plastic ties or two-sided adhesive tape.
  • Set the front skirt panel.

Skirting PVC with a separate cable channel mounted almost as

When installing it is important to have the clips on the same level. Only in the event will be able to fix the trim without problems. Permitted run - less than a millimeter, so try before you mount, carefully calibrate the position of the fastening straps or clips. One of the options - make a template. For this cut a piece of a length of about 15 cm to make a hole in it and used as measurements by applying the right places.

Installation via the plinth, with dowels / screws

This method is suitable for not very smooth walls. The plinth makes a hole through it, by means of self-tapping screws or dowels, is attracted to the wall.

It seems simple, but only so long until you start making your own. And there is a problem: in what order better to drill, how far apart to install fasteners, how to do so, so as not to spoil the look too.

There are several ways, but the most correct algorithm plastic skirting boards mounted as follows:

  • Put to the wall bar is pressed, we align. If you have a helper, he holds in a fixed state. If you work alone, secure it with masking tape. It is also possible to drill and set a deadline fixture, which will be hard to fix the bar and give it will move.

Installation via the plinth

Drill and not to spoil the baseboard or flooring - that is the problem

The last step - camouflage seat fastener installation. This step is not necessary if the plastic floor plinth was formed with the cable channel and hardware installed in this recess. If you have to drill through the front surface, the remaining holes mask the stickers in the form of small circles, which are selected by color skirting.

Selection of screws / screws / dowel-nails

First, about the size - the load on the plastic moldings are usually not very big, so take small fasteners. Optimally - diameter of 4-5 mm (and can be 6 mm) length - 25-40 mm.

Color fixing - white, yellow, black - choose depending on the color of the plastic moldings. The choice is simple - to make it less noticeable.

Fastening selected flat wide hats

When choosing a look at the shape of the cap. It should be large and flat as possible. In this case, everything will be easy to disguise.

Some practical points

When installing plastic skirting boards with cable channel, it is more convenient to lay cables already strapped somewhere in the beam. If the cables are very hard, they strive to jump. In this case, the tie is more convenient to use double sided tape. He will hold the wires in place.

Cut some types of plastic skirting boards can be normal office / wallpapering a knife, but it is better to use a saw with a blade for metal

Even when properly calculating the length of baseboards of pieces (which must protrude 2-3 mm in additional element) have outer corners popping property. To get rid of this trouble, Connect sealant greased. It is better to use silicone. He remains elastic after drying, can be removed if necessary.

Types of skirting boards and methods of their mounting

Skirting boards on the ceiling and on the floor is one of the elements of the interior, which are selected in the last instance, when the renovation is almost finished, it is such elements are very important in creating the perfect type of premises. Skirting not only closes the gap between wall and floor or wall and ceiling or hides wires and cables, but also provides a harmonious combination of colors of the floor, walls, ceiling and furniture in the room.

Mismatched moldings can hopelessly spoil the impression from the most expensive flooring, baseboards and the floor without even looks as if renovated indoor lasts forever. In turn, the correct choice of material, color and size plinth - a guarantee that the entire interior will look more holistically and stylish. In today's market of construction materials can be found skirting for all tastes and budgets, so that the inexperienced buyer is difficult to navigate in this diversity. Let's try to talk about advantages, disadvantages and features of installation of various types of plinths.

The traditional goal is wooden plinth.

This is a classic for framing floors, parquet or laminate. Such baseboards made of precious wood, such as oak, cherry, maple, etc., uses an array of wood or natural veneer coating. The advantages of this kind are obvious: the wooden plinth is an environmentally friendly, durable, and looks noble. However, high quality and causes a corresponding price that is a drawback of this embodiment. On the other hand, the cost of the floor is much higher than the cost of a plinth, and if to save on the baseboard, you can spoil the impression of the floor as well.

But if you really need to choose something cheaper wooden plinth, it is better to give preference veneered MDF Skirting.

For manufacturing such skirting material used from medium density wood fiber, are typically used coniferous wood. Veneer is glued to the base and varnish, whereby the plinth becomes resistant to moisture and it looks like new for many years. The spectrum of colors and textures skirting MDF extremely wide, so we can choose the option that harmoniously combined with any kind of coating.

Even more budgetary species is laminate moldings, which differs from the preceding species by the fact that the substrate is not adhered veneer, but simply a film with an appropriate pattern which the top is covered with varnish. This plinth perfectly with laminate flooring. Of the undoubted advantages of this type should be called reliability, durability and the ability not to lose color when exposed to sunlight.

a new type of wooden skirting boards appeared on the market - flexible wooden plinth. In appearance, this kind does not differ from the usual, but it has a unique feature that makes it an ideal solution for curved surfaces: if to wipe the baseboards a damp sponge and wrapped in foil for several hours, it will be easy to bend, and in a few days to dry and It hardens again, retaining a predetermined shape.

Another view of the plinth to the floor, which is worth paying attention to is cork plinth. It is made from the bark of oak or cork. Such moldings are not only resistant to moisture and mechanical stress, but also provides additional thermal insulation. Among other advantages of cork plinth - that it is relatively flexible and environmentally friendly. Fasten the plinth with a special glue. Particularly suitable for cork floor.

In addition to the wooden baseboards, recently becoming popular metal: aluminum, brass, stainless steel and the like.

metal plinth suitable for rooms with high levels of humidity, such as bathrooms and kitchens, because they are not afraid of moisture, mold and mildew. Rugged and reliable, they are suitable for ceramic tiles and self-leveling floors, as well as to the carpet. To the wall metal plinth mounted with dowels.

Very popular skirting boards made of PVC, that are affordable and perfectly suited to the laminated floors, carpets and tiles.

Due to the fact that the edge of the baseboard, PVC soft, it can help to conceal small irregularities of the walls. Also, in such a baseboard you can hide a variety of cables and electric wires. The color spectrum of such skirting almost limitless.

Usually choose a plinth to a tone darker or lighter than the other way around doors and floor . If the walls are covered with self-colored wallpaper or decorative plaster, you can pick up the baseboard and the color of the walls. If the colors of the room allows you to install baseboard white, it is necessary to do so, and because the white plinth look very elegant. Bold and creative solution of the modern interior designers - a plinth contrasting color to the floor. In any case, before you finally decide with what to choose plinth, better draw a sketch of the future interior, and better - to create a sketch by a computer program. This will allow to experiment with different materials and colors and choose the best without spending extra money and without risking to get a room with a plinth, which looked good in building supermarkets, but is not suitable to the interior.

skirting Size matters, too: thin baseboard suitable for rooms with a low ceiling, and for rooms with high ceilings is better to choose a wider plinth.

Ceiling moldings should blend in with the color of the ceiling and walls. This usually fit skirting bright colors, but also possible contrasting solutions.

Buy a plinth can be in the beginning of the repair or construction, but to begin the installation only once after all the "dirty" work.

Installation of the wooden plinth It requires advance preparation. To begin with, treat the wood abrasives, zaґruntuyte thereafter, and after the primer has dried, it is possible to move the painting in the desired color plinth. Customized baseboard must be very carefully and gently, even though it might take some time. The ends of the baseboards need gash angle 45⁰. If between skirting still arose gap, it is possible to hide it by using a special mixture spackling wooden products. The whole look of the room depends on how carefully skirting fitted on the joints, especially in the corners. For fastening the plinth to the wall using screws or raised nails. In order to hide the site of attachment, you need to putty the nail heads. Also, you can glue the plinth to the wall using special glue.

The advantage of plastic skirting that it does not need to be customized as well as wood, because in a set of plastic moldings are a variety of mounting accessories: angles, plugs, brackets for connection and the like. Plastic moldings fastened by means of clips flush-mounted or "liquid nail". At a distance of 50 centimeters dowel punched metal part of the fastening system. Then you need not press the plinth in place of lock so that the rear side of the plinth got to fix the system slot and tighten. On the front of the plinth there is no change, and attachment points are absolutely invisible.

Another advantage of this type of skirting is that it can be removed at any time, and at the same time retain the original appearance of the plinth, and it can be set again, for example, after the floor heating installation. Klyaymery necessarily need to buy complete with plastic moldings themselves, since different manufacturers make skirting wide variety of shades, and then find klyaymer desired color will be very problematic, and the same may be problematic klyaymera find the right size and design.

Recently appeared on the market a plinth with removable strap. Mount a plinth is very simple, and a bar will not be visible places plinth mounted to the wall.

Modern building materials market offers a wide selection of different kinds of moldings from budget to expensive options baseboards from modern synthetic materials. If the installation of traditional wooden baseboards - quite hard work, the new developments are designed for you to install the plinth was pretty easy.

Among the variety of different materials, shapes and colors, you can always choose the perfect option, if only to give this issue enough attention.

12 tips on how to choose the plinth floor + photos

Skirting boards - this, at first glance, a mere trifle, a choice few who pays due attention. Nevertheless, this part of the perception of the interior depends, after all the impression of little things. Not to act intuitively, we shall understand how to choose the plinth to the floor so that it most accurately consistent with the width of the room, the color, the type of material, shape and style. Professionals at the interior baseboards pay a lot of attention, perceiving them not only as a functional piece that covers the gap between the floor and the wall, but also as an important element of the same space as a door or window. It is time to reveal the secrets of selecting the right skirting boards, used by designers.

First, we pay attention not to form or skirting material, and its color, so this parameter always pay the greatest value. there is Several approaches to the choice of color skirting:

  • the color of the floor covering - classic and most common method to merge the plinth to the floor. The probability to spoil the interior is minimized, so the method is recommended for all those who are afraid of bold contrasting solutions. Possible to use skirting one to two shades lighter or darker flooring. This option is great when the room is used solid wood, parquet, laminate or linoleum;
  • the color of the walls. This is possible only in the case where the walls are painted or plasteredone color. It is advisable to choose a plinth at the time when the coating is applied and dried, otherwise you can not guess with a touch;
  • the color of interior doors, but in this case, the plinth height must be the same as the width of the door trim. Often this method is used when you want to blend in with the interior of the door that does not match the color of the walls, furniture and floors. To get really good, you can color the window frames, doors and skirting boards do the same;
  • contrasting shade, which does not repeat any color of flooring or wall color or the color of the door. To properly combine seemingly incongruous shades, you must have a good sense of taste. You can take white plinth, which in recent years in high demand. Be that as it was him, better still advance in a special program to create a project of the future interior and try different shades. There is a very easy-to-use program.

№2. What can be made floor plinth?

The second most relevance and importance of the choice of skirting boards is the issue of the material of manufacture. In this case, it is best to start from the flooring material:

  • wooden plinth suitable for floors of parquet and solid wood, wood flooring, laminate;
  • MDF baseboard skirting board and veneer suitable for parquet and laminate flooring;
  • PVC skirting - the cheapest and most popular option is often used with linoleum, tile and carpet;
  • ceramic moldings not so long ago, it is now available in a wide range, is well combined with ceramic tiles.

No. 3. Wooden plinth: pros and cons

Despite the emergence of many new materials, redeeming its high performance, the tree remains at the top of popularity. In addition, it is difficult to imagine that the wood floor was decorated with moldings of unnatural material. Appreciate the tree due to its numerous advantages:

  • high price;
  • sensitivity to temperature, high humidity, which imposes restrictions on the scope of use of the material (it is not suitable for kitchens and baths, but there solid wood is rarely used).

Installation wooden skirting usually carried out on the flat head screws, the screws are sometimes used with plugs. Wood can be easily cut at any angle, it can be easily attached to the base and removed, be repaired. It is important that the wall was perfectly flat, otherwise the wood is quickly deformed, and not have to speak of aesthetic form. Use for mounting liquid nails are not recommended: in the case of change of humidity can create internal stresses in wood, which tear away from the wall and the skirting board and the wall part of the coating.

Wooden plinth is selected from the same breed, from which the finishing floor made, and it is desirable to select a plinth at the same time for this fabric. As for timber, the cheapest cost pine, expensive - oak and linden, rarely used ash, alder, teak, cherry, walnut, birch. Lovers of the exotic and innovative solutions can turn its attention to the wood merbau or dusii. If the plinth stands suspiciously cheap, pay attention to its quality: some manufacturers offer products of three longitudinal glued layers of wood.

The cross section of the wooden plinth may be different, as the shape and width. Today, perhaps even manufacturing baseboards on request, if they need to be exactly repeated bends and other complex space premises, but it is a pleasure of luxury.

If you plan to open the baseboard varnish or wax, remember that wood may change color. To understand about what the result will be, you can wet the sponge part of the surface of the untreated floor.

Veneer baseboard is similar to the structure of the floorboard. It only a top layer made of fine wood (Walnut, oak, bamboo, pear, etc.), and the base is made of pine wood or spruce. The advantages and disadvantages are the same as in a purely wooden plinth, but the price is slightly lower. Color and surface topography can be anything. By the way, today, veneer and wooden plinth equipped with a cable channel for laying electric cables.

Plinth made of MDF - is middle ground in terms of price and quality. By the properties of the material is almost equal to the tree, and in some respects even ahead of him, and at the same time is much cheaper. MDF boards made of wood chips, which are compressed under heat and pressure together with urea resins. It turns out strong and not hazardous to health material that does not emit the air pollutants. Top plate can be painted, laminated veneer film or a thin layer of natural wood, so the appearance is very diverse.

  • resistance to moisture and temperature extremes;
  • UV resistance;
  • anti-static;
  • easy installation and maintenance;
  • relatively low price.
  • durability and mechanical resistance is much lower than that of a tree, but higher than that of plastic.

Experts say that the MDF baseboard can be mounted on the liquid nails, but it is better to use special klyaymery, which are screwed to the wall. Due to such mounting plinth can be removed and reused. Small flexibility of the material makes it possible to mount it in a slightly curved walls.

Sometimes on the shelves is found LDF-plinth. LDF-plate manufactured by the same technology as that of MDF, but different lower density: 450-650 kg / cm 3 for the LDF against 650-850 kg / cm 3 for MDF.

More than half of those who are beginning to wonder what the plinth choose, stop in the end it on a plastic version. On the shelves of such products is much more than wood or veneer, for plastic moldings It looks very good and is cheap. They make such a plinth made of foamed polyvinyl chloride product can be of any color and relief, so select the desired option will be easy, but it's not the only advantages of PVC skirting boards.

  • low price;
  • resistance to moisture and rot, so a plinth can be used in the bathroom and in the kitchen and wash safely, without fear of the consequences;
  • resistance to ultraviolet rays and temperature changes;
  • the presence of voids within the plinth allowing to hide cables weight.

  • affectation;
  • low durability;
  • low mechanical strength.

plastic moldings It consists of mounting and the front part. To the wall with screws is mounted attachment portion, so the front side is smooth. Between the fixing and the facepiece is formed sufficient space in which to place the electrical wire, and sometimes only enough space for a television cable, but can sometimes plinth put a bunch of wires, and also divided by partitions for convenience. At the ends and corners use special caps on them when choosing a pay utmost attention, as they are often very different in color from the plinth.

For a floor covering of carpet There is a special plastic moldings, which looks like an L-shaped strip, in which you want to insert the cut from the carpet tape. As a result, unable to completely mask the plinth.

If the room a lot of curved and irregular shapes, then a better option than a flexible plastic moldings, not to find. To acquired unique material properties, in the manufacture of slightly alter the spatial structure of polymer threads, but to preserve these properties plinth must be stored in special packaging. Often flexible moldings produced in the form of a long tape that allows you to carry out an installation with virtually no seams.

  • flexibility and the ability to make the desired shape;
  • moisture resistance and ease of care;
  • resistance to temperature extremes.
  • the relatively high cost;
  • installation complexity.

Installation is to install the supporting profile, over which is attached a flexible face. It is pre-heated in hot water or under the influence of hot air until until it is pliable. It can then be secured in the mounting segments and wait until it has hardened himself, taking the necessary form.

Just a couple of decades ago, during the design space, ceramic tiles, skirting boards made by hand, by cutting the same tile on the side. Get the straight edge was not always so and the view of the plinth was not very aesthetic. Today ceramic plinth often comes with tiles, has exactly the same color as the base material, and differ only in size, and its width make this, to be able to join the seams. Of course, you can select the plinth completely different color, and the other party. Between the wall and the bathroom often use a plinth arched shape.

  • durability;
  • resistance to moisture, sunlight, temperature variations, so for kitchens, bathrooms and hallways an ideal embodiment;
  • stability of shape and dimensions;
  • mechanical strength.

Installation of ceramic skirting should not cause difficulties - a process reminiscent of laying ceramic tiles. Mounted on a plinth glue, nailed light rubber or wooden mallet. Masked seams waterproof grout.

For the manufacture of skirting board can be used aluminum, stainless steel and brass, more often, of course, meets anodized aluminum.

  • high strength and durability;
  • beautiful appearance;
  • resistance to mechanical damage, moisture and temperature extremes;
  • durability;
  • a cavity for laying cables.

Of shortcomings It may be noted the high cost and compatibility is not all materials. Aluminum plinth will normally look to the tiles, granite tiles, self-leveling flooring and commercial linoleum. Most of the material used in the public areas, but is also suitable for kitchens and bathrooms, to complement high-tech style to the interior.

Cork skirting - this option is not the most common. Made of cork, a natural material is completely harmless to health, great for those rooms where used cork flooring or cork wallpaper. The color scheme of the limited, the price is high.

The height can vary plinth from 3 to 15 cm, and the choice of setting depends on the room size and ceiling height:

  • for small low rooms (With a height of about 2.5 meters) it is better to choose thin baseboard of 3-5 cm, the color shade is desirably repeat walls to baseboard seemed natural their extension;
  • for rooms of average height (about 2.7 m) suitable plinth 4.5-7 cm in height, which is the widest range;
  • at spacious high rooms it is not recommended to use a narrow plinth - it is better to opt for high standards that will either contrast, or color of the flooring.

To choose the right skirting board, you must take into account the style of the interior:

  • classic style It involves the use of high baseboards made of wood or MDF, with a noticeable relief. Suit all shades of wood, especially dark, and white;
  • minimalism It involves the use of the most simple plinth, with a smooth surface, usually white in color. Material: MDF, metal, less wood and plastic;
  • high tech - a shiny metal plinth, plastic or MDF;
  • for style country characterized by an abundance of solid wood treated rudely, and skirting boards are no exception;
  • for style modern with its ornate forms excellent flexible plastic moldings.

Floor plinth set already in the final finishing works, after installation of floor and wall coverings. However, even before the repair is necessary at least in general terms to represent the color, shape and size will plinth - select the final version is better after all the finishing is done, and will be visible to the final shades of the floor and walls.

Similar records


  • Balconies and loggias

Selection of articles on the subject: "Repair and finishing of balconies and loggias."

Selection of articles on the subject: "Repair and decoration of the bathroom."

Selection of articles on the subject: "Repair and decoration of the living room."

Selection of articles on the subject: "Repair and finishing a child's room."

Selection of articles on the theme. "Repair and decoration of the kitchen facilities"

Selection of articles on the subject: "Repair and decoration of the room hallway."

Selection of articles on the subject: "Repair and decoration of the bedroom."

Selection of articles on the subject: "Repair and decoration of the restroom."

12 tips how to choose a watering can shower: types, material, fixture manufacturer

6 tips for choosing and painting with acrylic paint walls, ceilings and floors

10 tips for flexible finishing stone walls

8 tips which pipes for water supply is better to choose diameter, materials

14 tips how to choose paint for wood for interior and exterior use: types of varnishes

10 tips for choosing a 3D plaster panels for walls: shape, installation