Step by step construction of a waterfall in the country with their own hands

Creating pools, ponds, fountains and waterfalls - the trend of modern landscape design. Small pond immediately transform any unremarkable garden in a cozy place.

On hot days - this is the best place for rest on the nature, the water is constantly fresh and cool. The pond will be much more picturesque look, especially if it is to pour fresh water flow, such as the man-made waterfall.

Great beauty decorative waterfall in the country can be done by hand, putting it at a minimum of effort. If you already have on your site is a small pond, the waterfall will make it even easier. If the reservoir is not present, then you have to build it from scratch.

Selecting the depth and shape design

The shape of the pond, from which we will be doing a waterfall can be absolutely any. If you like the precise geometry of the architecture, the pond can be square or round.

If you like the more natural shape, the outline of the pond can be different. The main thing is that it please your eyes.

The pond can be built is not deep, but if you do not plan to in the future to breed fish in it or underwater plants.

If you want to pond pleased extraordinary beauty of flora and fauna, while its depth should be at least a meter, or better still deeper, that your animals can survive the winter and perish.

Overseas curiosity Cercis Japanese or kruglolistnik firmly settled in the gardens of Russian gardeners. In order not to be disappointed in this tree, you need to know how to care for Judas.

The choice of location for the construction of the pond

Pond best to choose a place where a rising and up to 12 hours and is fully illuminated by the sun, afternoon, it is desirable that a shade or partial shade.

And this, in turn, is not the most good effect on the inhabitants of the pond.

Foundation pit - as it should be?

Well, you have decided on the size and shape of the pond, it's time to dig a pit. First we need to insert pegs into the ground and pull the string on them, so we draw the outline of the pond.

And if something happens, you can always adjust its shape to become really ideal.

Earth, which is formed in the process, can not be disposed of nowhere - it is still useful to us. However, it is clear it of stones, roots and various debris. Land of the pit walls will always crumble - it's inevitable, so do not worry once again.

It occasionally moisturize and ram pit wall. When it is ready, it follows the bottom pour sand, about 10-12 centimeters, then it is well compacted.

This is probably the most important stage of the work. On how well you perform depends on the longevity of your decorative waterfall.

For waterproofing of the pond can be used PVC film - it is ideally suited for this, durability (service life Around 15 years), which will allow your fountain to function longer.

Was covered with a protective film, our pit. However, make sure that a substantial portion of the film remained on the excavation, so it can be a good fix.

If you decide to use this method of waterproofing, while in winter the water will have to come down. This is due to the fact that during freezing the water volume is increased, leading to rupture of the film and, in turn, breakage of the waterfall.

The easiest option - a waterproofing concrete pond. This option is several times stronger than the others, and the water for the winter do not have to be drained, so the waterfall will delight you all year round.

First, the bottom of the pit is necessary to pave the insulating film, and then spread the metal frame of the future of the pond. Then pour the concrete floor, thereby strengthening the lower part of the frame.

About a day and a half, the bottom will fall asleep and you are ready to fill the walls.

In the video, three-level step by step creation of a pond with a waterfall.

To create a waterfall with his hands most often used two options:

  1. With the use of the formulation. It can be purchased only in specialized shops. To date, such forms in the sale a lot, you can choose one that is right for your site. This can be confusing shaped vessel or sculpture.
  2. cascade. If you no longer like this design, then, for its construction, you will need a lot of stone. The most suitable material for this purpose - sandstone, however, can use large boulders on request. Water to run nice and smoothly, you need to use flat stones for the construction of the cascade.

Due to uneven coating boulders, the water flow can flow more separate streams.

Selected stones should fasten between them. To stones heap well kept, they are best bonding cement mortar.

If the height of the waterfall is not more than 1.5 meters (this is the optimum height, as for such a body of water is the easiest way to take care of), you will need a small pump with capacity of 70 Tues

At a higher stage, respectively, require more powerful unit. It is best to choose a pump with moschnostistrui regulator, so you will be able to fully customize how the water will flow.

To the top of the cascade pump will deliver water with the help of a special hose. All this construction is best to hide under stones, to all sorts of hoses and wiring are not seen by others and did not spoil the impression.

The hose must be attached to the ejecting opening of the water in the pump structure, then to stretch it to the top of the cascade, while the second hose that draws water should be left at the bottom of the pond.

In fact a small waterfall, made with his own hands, is ready.

Video on how to build a waterfall in the country with their own hands.

This is one of the most enjoyable stages in landscape design. Artificial fountains and waterfalls in the country - this is the main decoration of the whole area, the best place in the hot summer days, so a small pond has to be beautiful and pleasing look.

Decorating waterfall figures

For registration of shore, you can use plants, stones or special kits for garden decora. Here you will come in handy the land that remained in the process of digging the pit.

For framing the shore can be used sandstone or rounded boulders. For a more beautiful effect can be alternated stones and place them in a chaotic manner.

To splash not fly around the side of sandstone can do something in the likeness of masonry. Thus, while relaxing next to the pond you will not get water from a reservoir. Excellent material for decorating the shores of the pond - pebbles.

A flowering plants will make your pond in a fabulous area.

If the pond is clearly visible on one side only, the plants are best planted on the opposite side. If it is clearly visible from all sides, while plants are best planted in small groups to the shore easily visible.

At the pond with a waterfall, you can build a great place to relax, put a garden bench or a table with several chairs. At the water as well will grow roses, they perfectly complement the overall picture.

The photo collection waterfalls, made with his own hands.

Pond - a favorite place for all family members. For children can be placed a few garden gnomes and funny little animals.

If you love night gatherings, then you should think about pond lighting. For a more beautiful effect can be obtained from a specialist store the bulbs in the form of flowers. They will gently lay on the water, creating a romantic mood.

Instructions for creating a waterfall in the country with their own hands

Waterfall in the country - is a dream that many seem distant. In fact, it is done quite easily. This waterfall in the garden with your own hands you can make in a single weekend. The most important thing - to have some construction skills. And our recommendations will help you make the right choice of materials and technology. Imagine, only a few hours of simple work in the open air and waterfall cottage will delight you and your children for years to come. Want to know how to do it quickly and correctly - read on!

Video tips for creating cascades of waterfalls ↑

Decorative waterfall garden - the form and content ↑

If your garden has a pond or small pool, almost half of the work, think, made. After a mini-waterfall design implies the presence of three components:

  • decorative elevations at which water escapes;
  • container where it flows;
  • an electric pump which, in fact, is circulating water flow.

If the pond is no, then before making a waterfall in the garden, you need to find a suitable site and choose an interesting shape for him. It all depends on your imagination and personal preferences.

Little hint: in the nature of regular geometric forms are almost never found. Therefore, it is natural to look vodoomchik "a la naturel".

But even if you are a supporter of regular geometric shape, in any case - boldly embody it, they say, "in stone and concrete," or other dear to you scrap building materials. Especially that examples of such landscaping solutions abound.

Chalet waterfalls correct geometry, by the way, look great on the sites, decorated in the style of high-tech or modern.

Well, if your garden is fascinating for its elegant casualness, the undeniable charm give him a supplement in the same vintage style. Remarkably, for the creation of such delights will approach everything:

  • remaining from the pipe repair;
  • broken pots and shards;
  • old watering cans, buckets, bowls;
  • Second-hand plumbing.

Make a waterfall in the garden with his own hands from a picturesque pile of stones, and then in the evening to listen to the mysterious murmur of gentle jets - what else is needed for the romantic soul of rest?

In the notebook: Already at the design stage, decide whether to stay in your pond fish and plants. Garden waterfall is very salutary for fish and different algae:

  • Firstly, it provides them with oxygen;
  • secondly, in the moving water fish feel much more freely than in the standing;
  • Third, waterfall maintains a comfortable water temperature for the residents, which is especially important hot summer.

On the other hand, some flowers, such as lilies, running water acts too depressing - they will experience discomfort. Therefore, when choosing a waterfall flora and fauna make allowances for the "Think for yourself, decide for yourself - or may not have."

And now, from the words down to business. How to make a waterfall in the garden, you will find out right now. Drink coffee and start!

Waterfall in the country with their own hands - steps for creating ↑

Having defined the shape of the pond in my head and on paper, drawn with the shape of the earth.

  • Step №1. We are clearing the area. Free the land from stones, turf and other unnecessary. And if necessary - remove extra shovel hill. Ideally, a place in the next pool should be as flat;
  • Step №2. Mark the contours (e.g., pegs with a rope, or the remainder of whitewash lime) or encircle the finished plastic form;

  • Step №3. Arming ordinary shovel (1 pc.) And begin to dig.

Excavated soil in any case not to scatter, anyhow, on the site, and gather, somewhere separately. It is useful for the device itself falls.

Tip: When digging the ground immediately clean it from all branches, rocks, roots, debris, if any. Then with a clean ground will work much more convenient.

During the digging of the walls will crumble the earth. It is not necessary to be afraid of this. Such discomfort is eliminated very easily: at the time of digging the walls must be periodically moistened with water and a ram, clapping his hands carefully.

When the desired depth is reached the pond, do not stop there (because the process is so fascinating!) - dig more layer of 10-15 cm and fill this place is fine river sand. Now he, too, need to properly compacted, and the easiest option - from the heart to jump there. And the most fun option - to call the children and plenty to ride on the sand as you wish.

If you have chosen yourself as Pond bowls ready form, this section can safely skip - waterproofing problem is solved automatically. If you dug a pond from scratch, without a proper waterproofing you can not do, or body of water will be constantly dry. On the contrary, a garden waterfall will last a very long time, if by this stage come with great responsibility.

Waterproof coating options few:

  • PVC film;
  • butyl rubber film;
  • EPDM film;
  • concreting the excavation.

Let us consider each of them separately.

PVC film - the most common variant of the pit cover for the future pond. Its lifetime is sufficient substantial: from 10 to 15 years. Advantage - low price. The main drawback - the waterfalls garden with a waterproofing require special care. The water for the winter will have to merge, otherwise the ice will break the film.

Butyl film - a material specially designed to cover the bottom of pools and decorative ponds. Not afraid frosts (up -45˚S), very elastic (stretched to 430% of its original length), and abrasion resistant. The warranty period of 45-50 years. Price matches the quality of the material - about 2000 rubles per meter + the cost of the required set of components (special parts for the connection of film strips, fittings for pumps, etc.).

Synthetic rubber EPDM - a modern rubber film, which generally has similar characteristics with the butyl rubber. The main advantages of the material - a unique elasticity (due to the porous structure) and ease of installation. Therefore, this coating refers to materials premium. EPDM cost - within 400 rubles for "square" (3800-4000 rubles per meter).

Butyl rubber is a synthetic film and sold in the three embodiments, thickness: 0.75 mm, 1.125 mm and 1.5 mm. Of course, the strongest modification (1.5 mm) most resistant to mechanical damage. But in a form with intricate bends it will be difficult to stack. Especially, it concerns the butyl rubber.

Recommendations seasoned masters: before installing the flexible cover soil should be free from stones, plant roots and other "alien elements". But it is best to lay the film on the surface is already protected. As a protective material using geotextiles or thick cardboard. Economy option: old linoleum or simply newsprint. The optimum thickness of the "roughing" of the protective layer - 2.5 cm.

Concreting - the most reliable option pond waterproofing. If the concrete - it's your choice, you should mentally prepare for the following operations:

  • blanketed bottom of the pit with a protective layer (cushion waterproofing +), as an insulating material using PVC film or conventional polyethylene - cheap and reliable;
  • produce a framework of reinforcement (for the pool bottom and walls of the pool separately), when installed using plastic clips;
  • set and fill the formwork with concrete bottom (M300 cement above, gravel fraction of 5 to 20 mm.);
  • forward to pour the bottom and, only then, to take the walls (installation of the form + filling); it is important to remember that for walls carcass reinforcement is wrapped with wire without welding.

As you can see, nothing complicated. It would be the time and desire. By the way, if both of you are in short supply, you can simply buy a ready-made plastic basin.

  • Before laying a flexible material (EPDM, butyl rubber) to give him lie down in the sun for about 15 minutes film will be softer and installation much simpler.
  • 1 meter
  • After installation, it is necessary to keep the water in the pond to see, even if gained a level and there are no leakages.

Usually suburban waterfall height does not exceed 1.5 meters. Yes, frankly, not Niagara, but the pump will cope with their work "on Pyaterochka".

If the project includes a waterfall stone ledges, it is best to use a sandstone - it is light in the processing and natural looking.

Stack ledges start from the bottom. The first tier should be as smooth. And now the next can be any - depending on your preferences. Here are a few interesting options:

  • Water mirror wall - stones from which flows a stream must be absolutely smooth and flat;
  • separately falling jet - this effect will provide ledges with grooves and rough rugged surface;
  • Water flows smoothly and slowly - it requires stones with depressions in the middle; in this case, formed a kind of bowl, and water, filling a cup, will steadily and slowly wash down;
  • powerful stream splits into a fine spray of the lower tier - water flows under pressure between two closely spaced stones. The waterfall - 1 meter and above.

Stones waterfall tiers, stacking, bonding should be interconnected with foam or grout. Along the edges is better to make small bumpers that water flowed in line installed by you, not overflowed wide puddle.

Tip: When gluing foam stones she often ugly extend over the edge. For masking this defect immediately after gluing, were made osypte foam handful of ordinary river sand. So it will look very natural.

And now we go to the heart of the waterfall - the electric pump, because it is clear that by itself the water in artificial ponds not zabezhit upstairs. For the waterfall about a half meters will be enough pump 70W high.

Naturally, the higher the waterfall, the stronger must be the pump.

It is put on the bottom of the reservoir, so that neither he nor the cables are not visible from the outside. At the pump should be two windows: one through the water is absorbed (the hose from it, is attached to the top of the waterfall), through another - pushed (this hose will remain on the bottom of the pond). Moreover, the pump must be connected to a low-voltage transformer, and the transformer must be in the room. If you need to lengthen the connection cable, make sure you need the connectors, not afraid of water.

Thus, the pond is ready, the hill was built, the pump is running, and the waterfall begins to splatter. Now comes the creative part of our work - decoration. That's really nothing to imagination can roam endless! This small sculpture, and alpine gardens, and a variety of flowers and ornamental plants, and LED lanterns - a word that your heart desires!

Remarkably will look on the banks of your pond colorful pebbles and coarse gravel. A constant humidity will allow comfort to grow many plants, such as sanguisorba, valerian, iris and many others.

For myself, you can set the bench, disposing to rest, or, better yet, hang a hammock. And for children - to deliver wonderful figurines fairy-tale characters.

In short, the waterfall is ready. Now is not a sin and relax - near his pond, the sound of the waterfall and twinkling splash, the splash of the goldfish and the fragrance of flowers near ... Heaven on Earth exists, and you've just created it yourself!

How to make a waterfall for cottages and homes

portion Registration seldom without reservoir device. Water soothes, brings cool on a hot day. It's good and what can be done Falls with their hands, without attracting specialists. It is important to have a pump and a place where you can turn. Everything else can do it yourself.

Failure of even a small waterfall with your hands, you have to shovel a lot of ground: it all starts with the earthwork. It is necessary to dig a pit for the cup, which will collect water. The container is then to be sealed. There are two simple methods:

  • Use film. If you are planning a long service life, you need a special film for swimming pools and ponds (called butyl rubber membrane). It costs a lot (1 sq. M 10 $), but normally carries UV and frost, will serve for years. For temporary trial waterfall suitable film which is used for greenhouses. Just note that it should be an all-season with a lifetime of several years, rather than a few seasons. This option is cheaper, but also on the characteristics of a lot worse.
  • Put a plastic liner. They are still positioned as a bowl for the ponds and pools. Are relatively inexpensive - at 120-140 liters capacity are 1200-1500 rubles.

As the bowl use a plastic container

If you use ready-made bowls you are limited in the choice of shape and depth: only those that are in stock. In the embodiment of economy - for the waterfall in the country - can be used in any available sector capacity: old tub or tray. You can even adjust the barrel sawn in half, etc.

Using a film shape as depth, selected at random. But when working with film you have to be careful: although it is dense, it can break.

How to make a waterfall from a film: photo

First, mark up on the bottom of your desired shape waterfall bowls. The shape depends on the style and layout of your site. Strict geometric proportions for typical Nouveau can be in the art deco style. Otherwise try to give a more natural, non-linear shape. Most often, it turns out the pond in the form bean.

The easiest way to do layout with sand. It is poured into the bag corner cut off. Wake up to outline the contours of the sand. It is easier to assess whether correct shape you choose. If necessary, it can be immediately adjusted.

The contour of the sod is removed, and then excavate. Immediately, in the process, form ledges. The optimum depth of the reservoir - the order of meters. How many sites do you have in this, and what they will form - it depends only on your desire.

Excavate the desired depth, forming in the process ledges

In the pit dug immediately take away all items that can break the film: stones, roots, pieces, etc. Bottom, ledges, are aligned. Lined compacted soil. Use for this purpose the rammer. In its simplest form - it is a piece of a tree trunk with a nailed strip. Behind the bar is raised deck, then abruptly lowered her down. So compacted soil. Then poured sand layer -. 5-10 cm His rake leveled shed. Sand medium-take. It is well sealed by means of water. Otherwise, it will have to ram sand.

Sand first leveled with a rake

Immediately possible to form and slide, if provided in your waterfall. For example, such as in the photo below.

Waterfall with molded small earthen mound

Further, the pit is spread film. Under it is desirable to spread a geotextile (the cheapest - 600-700 rubles roll). This nonwoven prevent sprouting roots and also more uniformly redistribute the load. It is laid on the edge of the pit, veiled sides and bottom. On top of already - film.

As already said, it is better to use a butyl rubber membrane. It can be ordered in any format and get your fountain without seams. Calculate the size of the film is simple: twice the maximum width + depth + 60-80 cm on reserve at the edges. If your waterfall is size 2 * 3 m (in the most extreme points) and a depth of 1.2 m, the film will need:

  • a width of 2 * 2 m + 1.2 m + 5.2 cm = 80 m
  • 3m + 2 * 1.2 m = 0.8 m = 6.2 m

It spreads on the first day, Spreads, forming folds. Leveled, press down with stones on the perimeter. Then you can move to equalize on the ledges.

Better ledges completely lay stones. The bottom is also desirable, but you can use pebbles and small boulders. A ledges best draw layered stones. Though they are in the water, but are clearly seen. Falls do though artificial, but I want him to look harmonious.

A common mistake in the design of the waterfall - the side of the bowl without stones and the film spoils a good idea

Adding boulders one on one, they can and should attach solution. Use can be both large and medium-sized or small stones. It all depends on the configuration and height of the steps. As a result, the slopes are uneven, and also with ledges. It looks much better than the film shows through. Such a self-made waterfall brings satisfaction to owners.

Here's what you should get - through the water on the sides shine stones rather than film

The whole procedure of the construction of the cup, all the technological nuances and fully coincide with the construction of the pond. For information on how and what you can do it, read here.

How to set a bowl of plastic

When building a waterfall with his hands, using the finished container, for a start, turning it upside down, looking around the outlines. According to him excavate.

It should be slightly larger cup sizes. When the work is guided by the existing form, measuring ledges and forming similar contours. The shaped protrusions desirable to repeat with sufficient accuracy: they found that normal support.

Try on to the plastic ramps finds support

Ledges and bottom aligned, ram, poured sand layer 5-10 cm, leveled layer it, but do not shed or ram he compacted under the weight of the bowl itself. Place the bowl, we see that between its wall and the wall of the pit there is a gap. It is filled with sand, too. But here, it is desirable to seal. You have to do it a pole or something are like. If the soil is well drained water can spill rolled in sand.

If the container is plastic, with thin walls, and a large volume, better gap fill with sand filling it with water. So you will not be able to deform the wall too hard ramming sand.

Filling the gap and the decoration side

After this is only the beads and decorating apparatus slides, which will, in fact, decrease the water.

On the construction of fountains read here.

How to make a hill to the waterfall

If you are planning to decorate the edge of the waterfall with stones, and the hill like a high and large, through which water flows, you need a solid foundation - reinforced ground. Without it, the rocks will slide into the bowl. Next to the pits under the bowl is cleared and reinforced ground downhill.

Make a standard monolithic slab. First, dig a trench. Its size should be greater than the hill at 40-50 cm in all directions. Foundation pit digging depth of 20-25 cm Then, the following procedure works.:

  • Poured gravel layer thickness of 10-15 cm, its good ram.
  • Stack 12-15 mm diameter rebar. It put up and down with a 20 cm step at the intersection of tightening the plastic clips.
  • Poured concrete.

Under a waterfall near the house must be reinforced base

After setting concrete (a few weeks), you can start laying open slides. This procedure is necessary, if the height of the hill above ground level - about one meter.

If a small waterfall is planned, it is possible simply by clearing the ground, pour gravel (under it can be laid geotextile to rubble is not washed into the soil). Rubble is well compacted, the top pour some sand to lay out a grid of thick metal wire. It lay boulders decorate smaller stones, pebbles, sand, land plants. It will kind of flower hill with a waterfall.

At low altitude falls can do without concrete grounds

There is a second option - to make a waterfall cascade type, using the height difference on the site. Even small, a few degrees, the slope is much easier task: on the slope forming step, putting the stones in the form of plates. If the slope is no need to pour a mound of earth, carefully compacting each layer, not forgetting to form ledges. For the reinforcement of slopes, you can use a polymer network. It is spread, covered with earth. It will keep the soil from slipping.

On stretches ledges formed film which is pressed against the bed of stones. They need to lay out so that the water thereof with a stone dropped in on the other, rather than on film. And then - the case for registration

When forming slides for the waterfall stones with each other, though, would be large, central, preferably bonding cement-sand mortar (1 part of Portland cement, 3 parts sand and water 0.5-0.7).

Pump for the waterfall in the country or the area near the house is selected by two parameters: the height at which it can raise the water, and its performance.

With a height of more or less clear: it should be no less height difference in your self-made waterfall. Drop measured from the bottom of the container (there will be a pump), and up to the point where he has to pick it up. In small home waters, he rarely more than 1.5-2 meters. But, anyway, this track record.

Pump capacity indicates how much water it can be pumped per minute. From this figure depends on the power flow.

The pump is immersed in water

Submersible pumps are used in such reservoirs. They put on the floor, setting the basket of stones, or simply crushing housing several boulders. It draws water from the tank, feeding it into a hose that is attached to the outlet nozzle. This hose and navigate to the location where the water will run.

To be able to pull out the hose, the hill is inserted into a plastic tube diameter decent. That it could lower the rubber sleeve without any problems.

It is better to put the pump into the basket. It works well with clean water, and in your waterfall can be leaves, all kinds of lice, there will inevitably exposed to dust and other contaminants. A basket, or rather, the box can be obtyanut several layers of different density filters. First - the fine mesh and the floor it with something more compact, at least in the same geotextile. This filter will delay major pollution.

After you install this equipment, water filling and commissioning, we can assume a waterfall built with his own hands. It remains such a "trifle" as decoration shores.

If you want to was not a jet, and a stream of water will fall on top of the roller coaster to install another receptacle, but rectangular. One of its edge must be lower than the other.

Garden waterfall with a broad stream

There are special containers, but can be done from anywhere, by cutting edge and making a flat tray, from which water will flow and the wall.

To make such a simple tray

You probably have seen the mysterious waterfalls without the cup in which it falls. Flowing down the ledges, it is somewhere disappears. This is not a pond with a waterfall. No tank is not visible.

The water ran down the rocks, disappears

Of course, the capacity to collect water there. Simply, it is masked. It turns out a kind of "dry" waterfall. Make it, perhaps, no more difficult than usual.

The structure of the hidden cup

Capacity-Ground also: in the pit. Only the top it is covered with fine metal mesh cell (preferably stainless steel). If the dimensions of the containers get more on board, you can put as a foundation reinforcement bars or wooden sticks (do not forget to soak, not to rot).

On the metal net is spread more shallow, and suitable polymer. It will delay more or less coarse dirt. Stones stacked on top of a small size, decorating device. It turns out that the water falls to the ground ...

An interesting effect: water disappears

Do not always have a place in such a massive structure, mark a few meters. A small waterfall can be placed near the benches, arbors, in his favorite corner of the garden. These miniature devices require very low-power pumps, type of aquarium.

As the body can be any suitable container. Up to the ceramic or even plastic pots. They make up one upon the other. The bottom must be sealed, but the top - depending on the design.

Decorative waterfall of flower pots

In the embodiment pictured above, a small pump placed in a lower, greatest vessel. His cover with a plastic lid. The diameter is selected so that the plastic is getting to 3-5 cm below the edge and it can be closed with small stones. In this cover make numerous holes (drill). Also, make a hole in the middle of a pipe that will go from the pump.

Make a similar hole in the center and two other vessels. They gather the type of children's pyramid, and its center is the tube that runs from the pump. To design did not work very hard in each of the pots is inserted into the plastic liner. draped his shingle. The resulting pyramid pour water includes a pump. Clear soda fountain ready.

And you can do and small pets are waterfalls on this technology. For example, this would look great on the balcony.

Another version of a garden waterfall in a different style

The same principle can be made waterfalls in a different way. The principle is: the same. In the most high-capacity mask the pump. Tube or hose is fed up.

In a modern style

Home outdoor waterfall on the glass

Excellent interior looks the water flowing down the glass. In modern apartments the actual problem of dry air. But such a device - a great way to increase the humidity by using humidifiers. Such a waterfall with his hands to make a snap. The design is simple, looks great. Need a sealed tray. You can find some plastic container. By the size of do frame within which on the one hand to skip the tube from the pump. At the top of the tube is attached to the frame, it makes numerous holes.

Wooden elements saturate tinted oil for wood. It perfectly protects from moisture and gives a great view.

The device falls on the glass. The frame for glass falls can be wooden or metal

It is possible to make such a sealed unit. Work a little more complicated, but still doable. It is necessary to make the frame wider fixable second window. First, a glass panel mounted, hoses are routed, and a second glass and can be installed after a test run. Tightness is achieved by means of a sealant. Just take a neutral silicone (acrylic quickly turns yellow).