The choice of ceiling moldings: the different types and their characteristics

Very often you can see a situation where a small decoration works, which often occur at the last stage, it is not neglected. So, for example, to the choice of ceiling moldings are suitable not really carefully. But this is an important detail, which can be accentuated by the overall design of the room. And the wrong choice made will lead to the fact that even the most beautiful materials will look dull, without much spice. Also keep in mind that the fillet to the ceiling - it is an element that is able to hide the defects of the existing between two adjacent surfaces.

There is a lot of advice and tips on how to choose the ceiling moldings. But they all boil down to the choice of material used for the production of the fillet. Currently, there are many different options. There are modern products made of plastic, foam, polyurethane, and not to the past production of natural wood and plaster.

skirting material plays a fundamental role in his choice

This option is quite popular ceiling moldings, thus it is especially in demand for finishing works that require minimal cost.

Some of the positive properties of the product:

  1. Low cost. Indeed, this is one of the cheapest types of products that exist on the market today. It should be noted that a small price does not affect the final quality. But exercising choice - should carefully inspect all components for defects.
  2. Easy installation. To work is not required to use professional tools. The most difficult process - pruning, is done with a simple clerical knife.
  3. Low weight. This setting distinguishes all modern products. But the foam - a leader on this indicator. This feature allows you to perform the installation of completely independently, without the involvement of assistants.

Skirting of foam - the most affordable option among similar products

On a note! Often, there is controversy about the name of ceiling moldings right? After all, there are such common names as a baguette, quirk, friezes, molding. Of course, if you go into the details, then each item has its own characteristics, but as a general designation of ceiling structures can be used without restrictions.

There are also a number of disadvantages that should be considered:

  • High fire risk. Extruded polystyrene foam, which forms the basis for the production of the fillet has a high flammability. Of course, the location of the elements - this is the minority areas where there may be a fire. But such a predisposition is necessary to consider if the skirting board will be placed under the wiring, and also to arrange lighting.
  • Low resistance to mechanical stress. Damage parts of the foam is very easy. Therefore it is necessary to perform all the work very carefully. Even a small pressing leaves traces on the face.
  • Poor interaction with certain adhesives. Components of such solutions may react with the base material. This leads to the fact that it is corroded.

Choosing foam baseboard, you need to take into account its many shortcomings

Thus, choosing from foam ceiling moldings should properly evaluate all the "pros" and "cons." It is well suited for low-cost finishing works, but using a more expensive material - disharmony will be observed.

Ceiling Molding PVC - is a more practical solution, which is not much greater than the previous version at a cost. But this product has its own characteristics:

  1. Full fire safety. The material is not exposed to fire, it expands the scope of its use. It can be used in areas of high risk of fire, as well as in the kitchen area.
  2. Resistance to mechanical impact and UV. Plastic moldings perfectly withstand direct sunlight. This makes it possible to install the projector in well lit rooms. Also, the product is not afraid of mechanical action that allows you to work with less scruples.
  3. Excellent moisture resistance. The fillet is not affected putrefying bacteria, which destroy many materials. Parts, even at high humidity, retain their shape and appearance.
  4. Easy maintenance and installation. Indeed, there is no need for complex manipulations during installation. Aftercare is light, because the parts do not absorb dirt, odors and dust.

On a note! PVC products for the ceiling are a very interesting species that can be used in combination with plastic panels. Such elements include a groove, the retaining wall fragments. The main thing is to perform dock correctly.

Often skirting PVC is used in conjunction with the plastic panels, and has a groove for fixing them

Of course, the positive qualities of a lot more, but there are also cons. They are as follows:

  • PVC skirting is not very wide, so hide significant gaps - is problematic.
  • The product can be installed only on a perfectly flat surface. If training walls had not been carried out properly, because of the stiffness of the material, the fragments will emphasize all the irregularities.
  • Although the elements are not subject to fire - they melt well, so should not be installed in the heating pipes locations or heater.

It is very convenient that there are split fillet from PVC, which make it possible to hold concealed fasteners on the screws (this variant is more common in products for flooring).

This type obtained by polymerization of styrene, which is preferably used for thermal insulation. But excellent decorative properties of the material have expanded the scope of its application - there was a ceiling plinth made of polystyrene, which possesses the following qualities:

  1. A wide choice of options. This allows you to choose a model that is fully consistent with the overall plan.
  2. The ability to perform a variety of painting and hide the wiring. Such moldings can be painted in any color, and the back having a cavity is perfect for laying the cable television and Internet.
  3. Soft edges. This feature allows you to encircle all the irregularities that completely hides the defects. But this leads to the fact that the very item gets twisty.
  4. Accessibility. The price of the material is slightly higher than the foamed product, but lower than the ceiling the plastic version.

With its low cost and the numerous advantages of the moldings of polystyrene is a very popular

On a note! If required, the moldings of polystyrene can be used for edging small semicircular projections. But such work to be performed very carefully, because the product is very easy to damage.

Recorded and negative characteristics, a material which has:

  • Polystyrene foam moldings stronger counterparts, but are easily damaged by sharp objects. Therefore, all activities are carried out very carefully pruned.
  • It should be borne in mind that the product does not have a full fire safety. Although the products are not a source of the spread of fire.
  • Some adhesive solutions - can damage the material.

The choice of adhesive for polystyrene products must be carried out very carefully

There is a technology that allows you to lock most efficiently. It consists in that the underside surface of the articles previously sanded, this greatly increases adhesion.

It is a modern material of which produce decorative ceiling moldings having excellent properties. Indeed, this is a good solution to many problems, in particular - the high price of wood options, and great weight of gypsum products. Polyurethane fillets have excellent characteristics:

  1. High density. The material can withstand any mechanical stress, which makes the product durable.
  2. Clear texture. This is a distinctive feature of all polyurethane parts. All figures, even the smallest - are well marked.
  3. Wide choose. This plinth perfectly suited to any style. This allows you to choose the best option. In addition, fragments can be easily colored in a suitable color.
  4. Possibility of using covert illumination. This feature makes it possible to issue an original space.

On a note! There is a special kind of polyurethane products - flexible moldings. It is made with the addition of rubber, which reflects well on the final properties of the material. The fillet can purchase any curved shape, which will satisfy even the most daring design imagination.

Flexible polyurethane skirting option is ideal for edging curved surfaces

It is noteworthy that the material has a minimum set of disadvantages. In fact, they are more relevant to the characteristics of the product. So, not all forms are suitable for use with tension ceilings, because the connection must be carried out on the wall surface, which is not always enough to keep the elements. Also, before you choose a ceiling moldings, It should take into account that at least polyurethane and is available for purchase, but it is worth much more expensive than foam and polystyrene counterparts.

Now it is much more difficult to meet the ceiling moldings made of wood. Such polymeric material is gradually replaced embodiments. Although the products are quite remarkable properties:

  1. The strength and durability. Wooden fillets can last more than ten years. Of course, this is much less than the synthetic variety of species, but the time available is sufficient that the material does not lose its original quality.
  2. Full environmental friendliness. Indeed, there is much talk about the fact that modern material is completely harmless to humans, but they are not natural, and therefore will always have negative associations. Therefore, oak, pine and other species - will always be ekolocheskom trend.
  3. Amazing aesthetics. It is difficult to compare the polymer and organic options, because synthetic materials take virtually any shape. But no one can compare to the feeling of heat, which is inherent in wooden products.
  4. The possibility of staining. All items well to staining, perfectly hold the applied coating. This allows you to transform the interior, without changing the fillet.

Wooden quirk has many advantages, but due to high cost and a small variety of the product is not particularly popular

On a note! Currently, much more difficult to find wood products, which would have a wide variety of textures. This is due to low demand. Often these items are made to order.

With impressive advantages, natural fillet also differ a lot of unpleasant nuances:

  • Expensiveness. This variant has the highest value, even the baseboards, produced from cheap breeds, such as pine, are much more expensive than many polymeric counterparts.
  • Demands. While for goods simply to take care of, but they are very demanding on a variety of factors. Thus, any changes in temperature and humidity - lead to damage of the material.
  • The complexity of the installation. Indeed, when compared with other options, ceiling wooden plinth mounted due to screws, nails, dowels. The work can not always be done independently, without additional assistance.

Therefore, before you choose a design, you should consider all the pros and cons.

Plaster ceiling moldings - is an established option, which is used in the interior of those who wish to emphasize the unique style and a certain sophistication. It decorative quality is a major advantage of the material. Gypsum has excellent ductility, and therefore allows you to create unique masterpieces. Of course, products that are sold in stores, may not always meet the demands of customers, so many manufacturers offer customization. At a certain experience - details you can even make your own.

Plaster moldings characterized by high cost and complexity of the installation, but it is an essential attribute of classical interiors

Unfortunately, these types of ceiling skirtings have many drawbacks:

  • Expensiveness. Some options are superior in price wooden fillet. Even the simplest products are much more expensive than other types.
  • Fragility. The material is easily damaged. Slight mechanical action leads to the fact that the elements acquired defects that can not be corrected.
  • The complexity of the installation. Large workpiece weight requires work together, to meet the increased accuracy. To secure the fragments, it is necessary to use more sophisticated methods.

All this limits the use of plaster for these works.

Please be aware that the ceiling plinths differ not only in the material from which they are made, but also on the application. There are some recommendations to make the chosen variant successfully entered into the overall look of the room.

  1. Fillet from PVC. This option is best in harmony with the trim plastic panels. In addition, many species have a special slot for faster installation. In addition, such products is a great solution for suspended ceilings.
  2. Styrofoam. The most commonly used for finishing the designs that are made from slabs of GCR. Excellent for walls and ceilings finished with putty or plaster. In such a case it is not applicable for adhesive fixation, and putty solution.
  3. Styrofoam. A good solution for surfaces that are made of plastic materials and plaster. This selects a suitable attachment method - at glue or putty.
  4. Polyurethane. Universal products that are suitable for many materials. It happens that this is the only option when there is a lot of curved portions.
  5. Plaster baseboards. Of course, this type is more suitable for classical compositions. Very often, finishing is performed in part, for example, the details shall be established only at the corners. Fixing takes place on the filler.
  6. Wooden crafts. Such an option is rarely used. It is better to combine with wood materials to obtain greater harmony.

Photo Gallery: various types of ceiling moldings in the interior

Length, which is most often found on sale - is 200 cm Of course, other sizes are available, and allowing for the best option.. But more attention should be given to the product width. Thus, many designers prefer wider options. This is due to the following factors:

  • This quirk allows you to visually smooth corners. The room is not that such a rectangular, which reduces the irritation of being in her people.
  • Wide Ceiling Molding hides numerous irregularities and defects. For example, the existing differences in the level of height are evident most of all in the corners.
  • It is the perfect solution when the suspended ceiling is installed with uneven walls.

Wide plinth - great for high ceilings

But keep in mind that you need to take into consideration and the height of the room. Thus, for low rooms suitable least a version that will not look too bulky. The best is the size of thirty-five millimeters. With high ceilings - fillets are chosen based on the fact that they will be more than sixty millimeters. The average width of the plinth - a universal solution for any situation.

Various solutions depending on the color

Ceiling moldings in the interior plays an important role. Therefore, we select the fillet, taking into account not only the size, but also color. There are some simple guidelines:

  1. Products white, if they coincide with the ceiling make the room significantly higher. It is the perfect solution when the ceiling height of 2.4-2.5 meters.
  2. Dark and a ceiling plinth for matching the color of the walls, visually reduces the ceiling. Therefore suitable for facilities with high ceilings.
  3. It is necessary to combine the color of the fillet and the shades of the room. It is not recommended to use more than three different colors.

When choosing the color of the fillet, keep in mind that it should be in harmony with the overall finishing room

On a note! Black plinth - is an option that is considered universal. But worth considering that this color makes the room more closely. To determine the shape and texture, it is necessary to take into account the style used, as well as your own preferences.

If you follow all the existing guidelines, the choice of ceiling moldings will not cause significant problems. But we must understand that it is much better if everyone would follow the existing taste and a certain sense of proportion. Then, the interior will like this, to please, and do not cause negative emotions.

  • trim
    • Ceiling
    • Walls
    • Floor
    • Doors, arches
    • Window
    • Oven, Fireplace
  • Finishing facilities
    • Kitchen
    • Bathroom, toilet
    • Corridor, hall
    • Balcony, loggia
    • other rooms
  • finish buildings
    • Summer cottages and homes
    • Wooden houses
    • Saunas and steam baths
  • Decoration Materials
    • gypsum plasterboard
    • facing panel
    • Wallpaper, cork
    • Tile
    • Laminate, linoleum
    • Decorative plaster
  • Finishing work
    • Plaster
    • Primer
    • Caulking
    • Painting, whitewashing
  • Exterior finish
    • Facade

Wallpaper pasting process is perceived by many as a rather simple event, which does not require any special skills.

The interiors of houses cut down the tree until very rare. The reason for this is quite simple -.

There are different ways to create an attractive interior space. One of these is the implementation of an artificial finish.

Fillet ceiling materials and features of the installation

The theme of this article - the fillet (aka ceiling moldings or baguette). What material is it made? How attached? Is there some subtleties that should be taken into account during installation?

Article necks - fillet (aka ceiling moldings or baguette). What material is it made? How attached? Is there some subtleties that should be taken into account during installation?

Tip: another way to solve this problem would be a curb, which is glued as well as wallpaper, and a thin strip of contrasting color. At the same time he was visually delineate the ceiling to the walls.

  1. DALTEL ceiling will allow the room to emphasize a particular style. For example, a carved wooden plinth made of precious wood, ideal for the office or library, stylized antique.
  2. Finally, the rounded corners make the room more comfortable, quiet, relaxing and soothing. In humans, the angles associated with aggression, rounding - peace and security.

foam skirting

Foam - the most inexpensive and easy to process material for ceiling moldings. What are its characteristics?

  • Very low weight. Due to the plinth can not strengthen further until dry adhesive joint between it and the wall: all-purpose adhesive is easy to hold its weight.
  • Low density means an easy handling. The foam is easily cut with a conventional fillet with a sharp knife.
  • The foam does not yellow with time in the light, easily tolerate fluctuations in humidity and temperature. Fillet of foam can be safely used for finishing ceilings in humid rooms - toilets, bathrooms and kitchens.
  • The material is brittle. Inadvertently touching the foam ceiling moldings, easy to damage it. However, in fairness to touch the fillet from the ceiling - you need to try very hard.

We begin, however, from a distance. What basically need quirk or ceiling moldings?

  1. To hide the flaws and irregularities walls with ceiling connection. Stick ceiling moldings much faster and easier than to align all the angles to bring them in perfect condition.
  2. To hide the top edge uneven pasted wallpaper. If pasting premises were admitted flaws and the upper edge of the wallpaper is not parallel to the ceiling - quirk hide irregularities.

Tip: another way to solve this problem would be a curb, which is glued as well as wallpaper, and a thin strip of contrasting color. At the same time he was visually delineate the ceiling to the walls.

  1. DALTEL ceiling will allow the room to emphasize a particular style. For example, a carved wooden plinth made of precious wood, ideal for the office or library, stylized antique.
  2. Finally, the rounded corners make the room more comfortable, quiet, relaxing and soothing. In humans, the angles associated with aggression, rounding - peace and security.

foam skirting

Foam - the most inexpensive and easy to process material for ceiling moldings. What are its characteristics?

  • Very low weight. Due to the plinth can not strengthen further until dry adhesive joint between it and the wall: all-purpose adhesive is easy to hold its weight.
  • Low density means an easy handling. The foam is easily cut with a conventional fillet with a sharp knife.
  • The foam does not yellow with time in the light, easily tolerate fluctuations in humidity and temperature. Fillet of foam can be safely used for finishing ceilings in humid rooms - toilets, bathrooms and kitchens.
  • The material is brittle. Inadvertently touching the foam ceiling moldings, easy to damage it. However, in fairness to touch the fillet from the ceiling - you need to try very hard.

We begin, however, from a distance. What basically need quirk or ceiling moldings?

  1. To hide the flaws and irregularities walls with ceiling connection. Stick ceiling moldings much faster and easier than to align all the angles to bring them in perfect condition.
  2. To hide the top edge uneven pasted wallpaper. If pasting premises were admitted flaws and the upper edge of the wallpaper is not parallel to the ceiling - quirk hide irregularities.

Tip: another way to solve this problem would be a curb, which is glued as well as wallpaper, and a thin strip of contrasting color. At the same time he was visually delineate the ceiling to the walls.

  1. DALTEL ceiling will allow the room to emphasize a particular style. For example, a carved wooden plinth made of precious wood, ideal for the office or library, stylized antique.
  2. Finally, the rounded corners make the room more comfortable, quiet, relaxing and soothing. In humans, the angles associated with aggression, rounding - peace and security.

foam skirting

Foam - the most inexpensive and easy to process material for ceiling moldings. What are its characteristics?

  • Very low weight. Due to the plinth can not strengthen further until dry adhesive joint between it and the wall: all-purpose adhesive is easy to hold its weight.
  • Low density means an easy handling. The foam is easily cut with a conventional fillet with a sharp knife.
  • The foam does not yellow with time in the light, easily tolerate fluctuations in humidity and temperature. Fillet of foam can be safely used for finishing ceilings in humid rooms - toilets, bathrooms and kitchens.
  • The material is brittle. Inadvertently touching the foam ceiling moldings, easy to damage it. However, in fairness to touch the fillet from the ceiling - you need to try very hard.

ALTEL from expanded polystyrene

This product is often called wrong: quirk polyurethane. There is confusion with the typical materials names, roving from article to article and from the price in the price. Polyurethane - a dense wear-resistant material, which is often used as naboek shoe. Polyurethane foam is known to us as the foam.

Expanded polystyrene foam is denser and stronger; These qualities fillets from it are usually thinner. What other quality material worth mentioning?

  • As already mentioned, the material is denser and stronger. From it often do not only ceiling moldings, but a variety of moldings and borders. Moreover, they can be mounted where the reach of the inhabitants of the room: crush the Styrofoam is harder than the foam.
  • Processing still simple: a sharp knife or hacksaw will cut fillet, not crush it.

Note: processed antiseptic composition and varnished wood products are subject to deformation and rotting in a much lesser degree. But in the bathroom and the kitchen is still better to choose other materials.

  • In rooms with high ceilings are often used wooden fillets contrasting color. For example, fumed oak on the background of glossy white ceiling looks very impressive. But it is advisable to color the ceiling moldings had a few decorative elements in the room.

The most expensive and difficult to process ceiling moldings made of wood. The spread between the cost of simple spruce fillets and carved plinths made of precious wood could amount to tens of times. Cut them have only a hacksaw to fit connections file.

  • Wooden skirting better not mount adhesive (actually, it is not always possible), and special fasteners, or stuffed in the wall every half-meter wooden eyelets.
  • If you bought the ceiling plinths of wood with a beautiful texture to fit the corners have to be taken especially seriously. Any plaster, even exactly matching color will be visible on the background texture.
  • Fillet of wood not suitable for wet areas. humidity variations (and temperature) lead tree, causing the fillet to deform. In addition, the moisture will cause the wood to rot (see Ceiling wooden plinth:. Advantages, disadvantages and features of the installation).

Note: processed antiseptic composition and varnished wood products are subject to deformation and rotting in a much lesser degree. But in the bathroom and the kitchen is still better to choose other materials.

  • In rooms with high ceilings are often used wooden fillets contrasting color. For example, fumed oak on the background of glossy white ceiling looks very impressive. But it is advisable to color the ceiling moldings had a few decorative elements in the room.

The foam tiles on the ceiling types and installation manual »href =» http://potolokspec.ru/widy/iz-plitki/penoplastovaya-plitka-na-potolok-215 "> foam tiles on the ceiling types and installation instructions) .

The most expensive and difficult to process ceiling moldings made of wood. The spread between the cost of simple spruce fillets and carved plinths made of precious wood could amount to tens of times. Cut them have only a hacksaw to fit connections file.

  • Wooden skirting better not mount adhesive (actually, it is not always possible), and special fasteners, or stuffed in the wall every half-meter wooden eyelets.
  • If you bought the ceiling plinths of wood with a beautiful texture to fit the corners have to be taken especially seriously. Any plaster, even exactly matching color will be visible on the background texture.
  • Fillet of wood not suitable for wet areas. humidity variations (and temperature) lead tree, causing the fillet to deform. In addition, the moisture will cause the wood to rot (see Ceiling wooden plinth:. Advantages, disadvantages and features of the installation).

Note: processed antiseptic composition and varnished wood products are subject to deformation and rotting in a much lesser degree. But in the bathroom and the kitchen is still better to choose other materials.

  • In rooms with high ceilings are often used wooden fillets contrasting color. For example, fumed oak on the background of glossy white ceiling looks very impressive. But it is advisable to color the ceiling moldings had a few decorative elements in the room.

ontazh: tips

Mounting foam and polystyrene foam fillets on the ceiling does not represent any particular problems:

  • On the wall is marked edge of the plinth;
  • On respective surfaces plinths applied adhesive;
  • He pressed against the wall and left to dry.

However, like in any business, there are subtleties.

  • The perfect solution to not bother with adjustment angles - finished corners, external and internal. They may have a complex relief surface and becomes an independent design elements.
  • If for some reason you can not buy parts - used for adjusting the angle miter box. This simple carpenter's tool allows you to cut the fillet at an angle of 45 degrees.
  • For ceilings, the best fillet - wide moldings. They only stick to the wall. To Stretch ceilings can not glue the plinth: the adhesive may damage the film or warp it; besides the suspended ceiling is not a rigid structure, it varies.
  • Ceiling PVC moldings: Features installation »href =» http://potolokspec.ru/dopolnitelnye/plintus-bordyur/potolochnyj-pvh-plintus-17 "> PVC Ceiling skirting: Features installation).

  • In the inner corner of the length of skirting strips measured from the adjacent wall. In the outside - from the point distant from the corner into the room by the width of the plinth.
    • fillet label over wallpaper is possible; but it is much better to glue them to the bare walls and the ceiling to his painting. This will allow uneven surfaces with putty the cracks, without fear of the appearance of the ceiling and walls. In addition, the fillet is firmly in the plaster, and not on the wallpaper.
    • How to glue the fillet? The main thing - do not miss and do not maznut adhesive on the treated surface of the ceiling. Expose the plinth so that if it had to shift, then towards the center of the ceiling, not the wall.
    • In addition to any universal glue, foam fillet perfectly glued to a white acrylic filler. She also immediately possible to seal the joints between the skirting and the wall bars.

    Fillet ceiling: features and installation

    Quirk - it is a professional product name that we all know as the ceiling moldings.

    It is meant to hide the location of wall and ceiling joint.

    After all, there is the junction of wallpaper on the walls and the material that was used for finishing the ceiling.

    The range is very wide today fillets.

    They are made of different widths, shapes and colors.

    use different materials that each chooses for its interior for the manufacture of ceiling moldings.

    Styrofoam

    The most common type of ceiling moldings.

    Since the foam processing is simple, and the cost of the product acceptable.

    In a lot of foam fillet and advantages and disadvantages:

    • foam does not yellow over time;
    • material can easily tolerate change humidity and temperature variations;
    • fillet of foam feels fine, and the kitchen and in the bathroom;
    • weight of the product is very small, for its sticking can be any adhesive composition (can be used as an adhesive plaster or plaster);
    • for processing requires no special tools - just a sharp knife or office building.

    A disadvantage in principle, only one foam - fragility.

    Skirting ceiling of the foam used for finishing putty surfaces suspension systems of drywall suspended ceilings.

    If necessary, it can be painted with latex paint in any color.

    For sealing between the strips and the wall using acrylic plaster.

    These products resemble fillet of foam.

    But polyurethane is distinguished by high density and good flexibility.

    Polyurethane does not crumble and does not break.

    As a plinth slightly heavier than foam, then glue it better on silicone or acrylic adhesive.

    Typically, the polymer adhesive it is also on the ceiling hold, but will have to spend a lot of time and effort for installation.

    The cost of fillet of polyurethane higher than the foam.

    But the quality is much higher.

    This classic baseboards.

    Before the advent of plastic materials produced baguette ceiling is made of gypsum.

    But today, this material is rarely used.

    Basically, when restoration work on the premises, where previously it was a ceiling moldings.

    Such a product is very heavy and is used alabaster gypsum plaster or mortar for fixing it.

    Wooden ceiling quirk is considered one of the classic elements of the decor.

    But be aware that the ceiling moldings made of wood will only be appropriate when the walls of the room have a lot of wooden elements.

    But nowadays this kind of design is rarely used.

    For fixing these baguettes glue solution is not suitable.

    Use, as a rule, screws or nails.

    Such a product is worth more than all the other options.

    A wooden plinth installation is quite complex.

    extreme precision is required, because there is no way to cover the resulting gap with putty.

    One of the most popular types of ceiling moldings.

    The kit includes mounting hardware, baseboard itself and angular elements.

    The fact that the plastic ceiling moldings are not trimmed as the product of a different material.

    Used interior or exterior finished corner joints, which allow to obtain a very neat and beautiful corners.

    Another advantage of the plastic moldings - if necessary, it can be quickly removed from the ceiling.

    Installation of fillets for various ceilings

    Begin the installation of the baseboards of the internal angles and external slopes.

    There is a certain specificity of the installation, depending on the material from which manufactured the product, and a ceiling in a room.

    For example, plastic ceiling and wooden moldings set when the ceiling in the room single storey and latex painted or whitewashed with chalk (lime).

    Fixing these fillets will be mechanical.

    That is, using the dowel-nails 6x40 mm in size, which are set in increments of 30-50 cm.

    If the walls are made of solid wood or drywall screws that are used for wood.

    Suck another thing - fixing baguettes from foam or polyurethane.

    Foam ceiling moldings can be pasted on the ceiling and on the wall.

    Its weight is low, and even the usual "liquid nails" will keep its very high quality.

    Polyurethane moldings on the ceiling is not glued, but only to the walls.

    Since it weighs more than the foam.

    If you have drywall on the ceiling, you will perfect the foam molding.

    Since in any case the ceiling of plasterboard have putty, then mount fillet is logical to use the same filler.

    Or you can use a special glue such as "Titan", "Moment Installation", "Europlast".

    If you choose the glue should be applied on the back side of the fabric a thin layer of adhesive, give it some time to dry out and attach to the right place.

    Apply glue and applying the element to be very careful that it does not hit the front of the baguette.

    If the glue is made from a compound of seats, then it should be removed with a clean dry cloth.

    After the glue is completely dry, it should be all the cracks, gaps and joints to fill acrylic sealant or acrylic sealer.

    Already after the sealant is completely dry, it is possible to perform the surface finishing fillet.

    Quite different is glued baguette, if the room suspended ceiling made of PVC film.

    In some cases, gluing, and is not required if Fasteners has a groove for the decorative plastic moldings, and himself a baguette supplied.

    If such decorations are not available, then paste or foam polyurethane quirk.

    In any case not to the ceiling!

    1. Suspended ceiling, usually made of synthetic material. A part of the adhesive comprises a variety of substances that can damage the ceiling material.
    2. The surface tension of the ceiling exposed to drafts or water leaked from the top of the neighbors can move. If the molding is adhered to the ceiling surface, the junction may cause damage of the material web.
    3. The adhesive layer after drying is somewhat reduced in size. As a consequence, in this place creates additional napryazhenie.V eventually appear on the ceiling folds and looks a suspended ceiling very ugly.

    Usually mounted ceiling moldings before pokleit wallpaper.

    On the ceiling finish liquid wallpaper, see the link. What are liquid wallpaper and how to apply them to the ceiling.

    Learn how to stick to the tension ceiling moldings ceiling here. How to choose and how to install this useful accessory.

    But in the case of the stretch ceiling is not.

    After installation of stretch fabric is the final stage of repair facilities.

    Perform docking baguette in the corners of the room is much harder than docked along the perimeter.

    In order to fulfill the dock quickly and efficiently, you need the tools:

    Miter box (or yarunok) - a device that allows zapilivaem angles at 45, 60 and 90 degrees.

    A very handy thing!

    But it often happens that the corner of the room quite imperfect and under any value is not appropriate.

    Then out of construction paper or cardboard should make a stencil angle and then do it on the marks on the moldings.

    Should first measure the angle between the walls.

    If it is straight, the ends of the strips to be joined are cut at 45 degrees.

    To do this:

    • set plinth in miter box;
    • press the edge strips to the groove having a mark 45 degrees;
    • cut the fabric using a hacksaw or knife.

    External angle is less common than the inside.

    But still it occurs.

    Pruned it exactly the same as the inner corner, only the bar in stuslo laid on the contrary - if the long member is on the left side, it should be cut along the left point.

    If the right - then cut to the right.

    I should say that if you've never worked with angles up to this point, it is necessary to find a scrap strip (may have one) and practice with the inner and outer corners.

    Video of the ceiling fillets:

    On the third time will for sure!

    August 18, 2016 at 23:55

    Very useful article, except that in the definition putanitsa.Potolochny baseboard does not exist by definition of the word "plinth", "plinth" in Greek means the foot and can not be located on the ceiling, and only pola.Galtel is not so much detail and tool for its production, as the geometric shape in the form of rounding uglov.Galtel can be machine-building, automotive, furniture, construction stroitelnaya.V quirk is the rounded shape of the joint between the wall or between the wall and the ceiling or between the wall and etc. lom.Baget and paper strip on top of the wallpaper in the upper part of the wall near the ceiling. But the ceiling wall finishes or molding, with fastening exclusively to the wall (the ceiling of the space it occupies on the magnitude of the thickness) or a ceiling cornice, which is attached on walls and on potolok.A here both can have the form of fillets.